Interoperability Documentation v1.3

View a summary of the Document Review Process.

Additional test procedures and tool information is available for SATA-IO Member Download from the Logo WG Web page. Please log onto the Members Only area for access to these tests and document.


Vendor Model Ver Date Comments
Product Electrical 1.3 - PHY/TSG/OOB
SyntheSys BERTScope 8500C 1.0 6/3/2010 Approved
Agilent DSA91204A 1.0 6/12/2008 Approved
Tektronix   1.0 5/29/2008 Approved
LeCroy   1.0 6/05/2008 Approved
Product Electrical 1.3 - RX/TX
Agilent 86100C 1.0 10/13/2008 Approved
Tektronix CSA8200 1.0 5/29/2008 Approved
Product Electrical 1.3 - RSG - 5 MHz, and eSATA signal level
SyntheSys 7500B 1.0 12/18/2008 Approved
Tektronix AWG7102/AWG7122B 1.0 5/22/2008 Approved
Agilent N4903 J-BERT 1.0 5/29/2008 Approved
Device Digital 1.3 - GDR/NCQ/ASR/SSP/IPM - (updated IPM)
Ulink   1.0.1 9/27/2008 Approved
LeCroy   1.0 2/19/2009 Approved
Host Digital 1.3 - ASR/IPM
Ulink   1.0.1 9/10/2008 Approved
System Interop 1.3 - same as 1.1
Device Mechanical 1.3 - MDI/MDP - Slimline
Cable Electrical - 1.3 - SI - Same as 1.0
Cable Mechanical Inspection 1.3 - MCI-01
Cable Mechanical Insertion 1.3 MCI-02/-03/-04
Cable Mechanical Pull-out 1.3 - MCI-05
Supporting 1.3 - new comp pattern